新闻banner
Current location: Home >> News >> Common problem

Contact Us

Shanghai Jingbang Transmission Equipment Co., Ltd.

Tel: 021-59793568

Mobile: 139-1704-4039 (same number of wechat)

Email: shanghaibelts@163.com

website: www.shanghaibelts.com

Address: Changshu Industrial Park, Jiangsu Province

Conveyor belt tear repair method, cold resistant conveyor belt manufacturers tell you

2020-10-17 12:00:00
times

Conveyor belt is the carrier of the belt conveyor conveying materials, is one of the main parts of the conveyor, cold resistant conveyor belt, but in use, there will often be a problem, that is tearing. Tearing can be said to be a fatal killer of conveyor belt. Once the conveyor belt is torn, it must be stopped for replacement, which wastes a lot of time. Therefore, we should pay attention to the problem of tearing. The following conveyor belt manufacturers Xiaobian for you to introduce several causes of tearing phenomenon

1. The conveying materials contain sharp objects (the end of the object is sharp). These sharp objects are likely to scratch the conveyor belt. If the scratch is very deep, it is easy to tear when conveying materials, especially those heavy materials.


2. Belt deviation, if the conveyor belt deviation, it will make the conveyor belt force is not uniform, some parts of the force is large, some parts of the force is small. Idler is an important part of belt conveyor, which has many kinds and large quantity. It accounts for 35% of the total cost of a belt conveyor and produces more than 70% resistance, so the quality of the idler is particularly important. The role of idler is to support the weight of conveyor belt and material. In this case, it is easy to tear where the force is large.

3. The phenomenon of belt jam is also easy to cause the conveyor belt tearing. When a large number of materials fall in the chute, the conveyor belt will be stuck, which makes the conveyor belt unable to operate normally. However, the motor continues to operate, which makes the conveyor belt easy to tear. Idler is an important part of belt conveyor, which has many kinds and large quantity. It accounts for 35% of the total cost of a belt conveyor and produces more than 70% resistance, so the quality of the idler is particularly important. The role of idler is to support the weight of conveyor belt and material