Conveyor belt to avoid idlers being covered by materials

Conveyor belt material: PVC, PU, rubber and other materials. In addition to the ordinary flow operation conveying, but also to meet the oil resistance, corrosion resistance, anti-static and other special requirements of the material conveying operation. The use of special non-toxic food grade conveyor belt can meet the requirements of food deep processing, pharmaceutical, daily chemical and other industries. It is characterized by smooth transport, avoid transport damage; Low noise, suitable for the environment of low noise requirements; Its structure is simple, easy to maintain, low cost.

Conveyor belt, belt conveyor in agriculture, industrial and mining enterprises and transportation industry is widely used to transport all kinds of solid block and powder like materials or pieces, conveyor belt can be continuous, high efficiency, large Angle of transportation, conveyor belt operation safety, conveyor belt is simple to use, easy maintenance, low freight, and can shorten the transportation distance, reduce engineering cost, save manpower and material resources.

Ring conveyor belt (ring conveyor belt) is made into jointless ring conveyor belt (ring conveyor belt) in the production process. It is characterized by no joint in the core, no impact on the service life due to early damage at the joint. The surface of the belt is smooth and the tension is uniform, so the belt runs smoothly and the elongation is small.

Ring conveyor belt, ring conveyor belt: the ring conveyor belt refers to the belt has been made into a jointless ring conveyor belt in the production process, and the strength of the core joint can reach 90% of the strength of the belt body. There is no obvious joint defect on the surface of the belt. Therefore, the transportation of the belt is balanced and the use of the belt is small. Ring conveyor belt core is made of high-quality cotton or cotton interwoven canvas, generally 2-6 layers or NN-200 nylon canvas (or polyester canvas) as a strong layer.

Length and limit deviation of ring conveyor belt: Ring conveyor belt length m limit deviation mm length less than 15 ± 50 length 15-20 ± 75 length greater than 20 belt length ± 0.5% The company can according to customer needs to produce suitable length, width and thickness of the ordinary type, heat resistant type (120oC or less), Cold resistance type (not less than -40oC), acid and alkali resistance type, high temperature resistance type (not higher than 150oC) and health type circular conveyor belt.

Conveyor belt should pay attention to the following matters in the use process:

A. Avoid the idler being covered by materials, resulting in poor rotation, prevent material leakage stuck between the roller and the belt, pay attention to the lubrication of the moving part, but do not oil the conveyor belt.

B. Try to avoid starting with load.

C. If the belt goes astray, measures should be taken to correct it in time.

D. Local damage of the belt should be repaired in time to avoid expansion.

E. Avoid belt blocked by frame, pillar or block material to prevent breakage and cracking.