Conveyor belt manufacturers tell you the conveyor belt tear repair method

Conveyor belt is the carrier of belt conveyor conveying materials, is one of the main parts of the conveyor, cold resistant conveyor belt, but in use will often appear a problem, that is, tear. Tearing can be said to be a deadly killer of the conveyor belt, once torn, the conveyor belt must stop and replace, waste a lot of time, so we should pay attention to the problem of tearing. The following conveyor belt manufacturer Xiaobian for you to introduce several reasons for tearing phenomenon.

1, conveying material contains sharp (object end sharp) objects, these sharp objects are likely to be conveyor belt scratch, if the scratch once very deep, will be in the conveying of materials, especially those heavy materials, it is easy to tear.

2, the belt deviation, if the conveyor belt deviation, it will make the conveyor belt stress is not uniform, some places stress, some places stress is small. Roller is an important part of belt conveyor, which has many kinds and large quantity. It accounts for 35% of the total cost of a belt conveyor and produces more than 70% resistance, so the quality of the idler is particularly important. The role of the roller is to support the conveyor belt and material weight. Under these conditions, the area under heavy stress is prone to tear.

3, cassette phenomenon is also easy to cause the conveyor belt tear, when a large number of materials fall in the chute, the conveyor belt will be stuck, making the conveyor belt can not operate normally, but the motor continues to run, making the conveyor belt is very easy to tear. Roller is an important part of belt conveyor, which has many kinds and large quantity. It accounts for 35% of the total cost of a belt conveyor and produces more than 70% resistance, so the quality of the idler is particularly important. The role of the roller is to support the conveyor belt and material weight.